- Home »
- Catalog
Team C Performance » 90 Quattro, 4.1
Products for:
- Model: 90 Quattro
- Maximum Stroke: 4.1
View Universal items for: 90 Quattro 4.1
Browse Products
Moroso | Engine Rear Main Seal Cover
Description: Available for use with pre-1980 blocks with driver-side dipstick
Manufactured from billet aluminum
Includes fasteners...More Details »
Condition:
New
Price: $279.99
Moroso | Engine Water Pump Block-Off Plate
Description: Restricting coolant flow leaving the engine lets you control the amount of heat absorbed by the coolant
Red, gold, and blue anodized aluminum restrictor plates are mounted under the water outlet on...More Details »
Condition:
New
Price: $19.99
Moroso | Safety Wire
Description: Moroso Safety Wire is widely used to secure all kinds of fasteners and controls from nuts and bolts to check valves, switches, and modulators where a loose or lost component might mean disaster...More Details »
Condition:
New
Price: $43.99
Moroso | Wheel Cap Screw
Description: Manufactured from rugged Grade 8 steel to withstand the extreme loading placed on today's racing tires
Self-tapping screws feature a built-in washer face for maximum holding strength
Finished in...More Details »
Condition:
New
Price: $25.99
Moroso | Engine Oil Separator
Description: Air-Oil Separator Large Body, Chrysler 300C 6.1, 2005-10, Chrysler 300C 5.7 with aftermarket intake, 2005-10, Dodge Challenger 6.1, 2008-2012, Dodge Challenger 5.7 with aftermarket intake,...More Details »
Condition:
New
Price: $238.99
Moroso | Engine Crankshaft Main Bearing Shim
Description: Aluminum
Includes 3 shims per pack, 1/16", 1/8" and 3/16"...More Details »
Condition:
New
Price: $44.99
Moroso | Distributor Housing
Description: Allows precise adjustment of distributor shaft end play to improve timing accuracy and reduce gear wear
Works with Moroso, GM, Accel, Chrysler and other distributors with 1/2" diameter shaft...More Details »
Condition:
New
Price: $18.99
Moroso | Distributor Housing
Description: Fits: Small Block, Big Block, and 90 V6 Chevy Engines
Eliminates oil pump bind and spark scatter when using a distributor in an engine with resurfaced heads or decks
Made from high impact nylon to...More Details »
Condition:
New
Price: $12.99
Moroso | Differential Pinion Shim
Description: Kits include hard-to-find items needed to assemble Ford 9" center sections
Contains:
Housing gasket
Pinion shaft seal
Nine pinion support shims consisting of one each .005", . 006", .0075",...More Details »
Condition:
New
Price: $67.99
Moroso | Engine Water Pump Adapter
Description: Aluminum
Kit provides proper drive belt alignment with water pump
Shims are installed between the water pump pulley and drive flange
Kit contains two 1/16" spacers and one 1/8" spacer...More Details »
Condition:
New
Price: $16.99
Moroso | Coilover Overhaul Kit
Description: Makes adjusting coil-over shocks much easier than the commonly used hammer and screwdrier method
Works with Moroso, Competition Engineering, Avo, Hal, Koni, Bilstein, Carrera, Monroe and most...More Details »
Condition:
New
Price: $48.99
Moroso | Heat Shrink Tubing
Description: Insures a complete seal between spark plug, distributor boots, and spark plug wire sleeve Nos. 72000, 72002, 72004, 72011, 72012 or 72013
Packaged 18 shrink sleeves to a set...More Details »
Condition:
New
Price: $33.99
Moroso | Engine Water Pump Plug
Description: Clear Sight Plugs are like having a "window" to your float bowl
Allows you to check float bowl level without removing the plug and spilling fuel
Includes O-rings
Two per pack...More Details »
Condition:
New
Price: $12.99
Moroso | Engine Water Pump Spacer
Description: Converts "short" 1968-earlier design Chevrolet water pumps to longer, 1969-later design
Includes special heat-treated studs and gaskets
Spacers are cast aluminum...More Details »
Condition:
New
Price: $66.99
Moroso | Spark Plug Indexing Tool
Description: High-compression drag race engines require "indexing" of spark plugs to prevent contact between piston dome and ground wire of the spark plugs
Moroso's "Indexer," designed for both flat and...More Details »
Condition:
New
Price: $22.99
Moroso | Leaf Spring Perch
Description: Fits: Ford 9", Dana 60, and other 3" diameter axle housings
Precision stamped for easy weld-on installation
When installing a spring perch in a leaf spring car or moving the leaf springs inboard,...More Details »
Condition:
New
Price: $41.99
Moroso | Fuel Pressure Regulator Spring
Description: This heavy-duty fuel pump spring boosts Holley electric fuel pump pressure from 12 to 19 psi and increases overall fuel volume...More Details »
Condition:
New
Price: $12.99
Moroso | Engine Oil Pump
Description: Fits Melling M84A and M84AHV oil pumps
Increases oil pressure to approximately 100 psi for proper lubrication under sustained high rpm conditions...More Details »
Condition:
New
Price: $22.99
Moroso | Carburetor Stud Kit
Description: "Bullet Nose" studs are rounded on one end, making it easy to start nuts
Kits include 4 studs, hardened flat washers and jam nuts...More Details »
Condition:
New
Price: $18.99
Moroso | Carburetor Stud Kit
Description: "Bullet Nose" studs are rounded on one end, making it easy to start nuts
Kits include 4 studs, hardened flat washers and jam nuts...More Details »
Condition:
New
Price: $19.99
Moroso | Carburetor Stud Kit
Description: "Bullet Nose" studs are rounded on one end, making it easy to start nuts
Kits include 4 studs, hardened flat washers and jam nuts...More Details »
Condition:
New
Price: $22.99
Moroso | Engine Oil Pan Stud
Description: These stud kits make pan installation easy and prolong gasket life
Lock nuts feature attached washers with serrated faces to provide a positive grip on the pan rail
Studs are made of heat...More Details »
Condition:
New
Price: $43.99
Moroso | Engine Oil Pan Stud
Description: These stud kits make pan installation easy and prolong gasket life
Lock nuts feature attached washers with serrated faces to provide a positive grip on the pan rail
Studs are made of heat treated...More Details »
Condition:
New
Price: $42.99
Moroso | Engine Oil Pump Nut
Description: Wet sump oil pump stud (7/16" x 3-3/16") is manufactured from 4130 chrome moly steel
Provides improved mounting for all Moroso oil pumps or stock pumps on Small Block, Big Block and 90 V6 Chevy...More Details »
Condition:
New
Price: $19.99
Moroso | Hardware Assortment
Description: Bullet nose tip makes it easy to start mounting nuts
Prevents Small Block Chevy and Big Block Chevy cast aluminum valve covers from vibrating loose in competition
Includes eight 1/4"-20 x 1-1/2"...More Details »
Condition:
New
Price: $38.99
Moroso | Hardware Assortment
Description: Fits: SBC or any valve cover using 4-1/4" hold downs
These studs were developed primarily for the oval track racer using Moroso Small Block Chevy cast aluminum valve covers where a leaking valve...More Details »
Condition:
New
Price: $19.99
Moroso | Engine Valve Spring Compressor
Description: Simplifies between-rounds valve spring changing
Unlike models offered by other manufacturers, Moroso's stud mount tool fits both 3/8" and 7/16" rocker studs
Strong, durable handle withstands the...More Details »
Condition:
New
Price: $161.99
Price: $19.99
Price: $17.99
Moroso | Battery Cut-Off Switch
Description: Easy to install Disconnect Switch required by many sanctioning bodies
A quick twist of the non-slip handle shuts off all electrical current to the electric fuel pump, electric water pump,...More Details »
Condition:
New
Price: $57.99
Moroso | Battery Cut-Off Switch
Description: Easy to install Disconnect Switch required by many sanctioning bodies
A quick twist of the non-slip handle shuts off all electrical current to the electric fuel pump, electric water pump,...More Details »
Condition:
New
Price: $67.99
Moroso | Battery Cut-Off Switch
Description: Allows you to mount a Battery Disconnect Switch Nos 74100, 74101, 74102 (not included) to a roll cage tube with a weld-on bracket, then actuate it with this T-handle kit protruding through the rear...More Details »
Condition:
New
Price: $93.99
Moroso | Battery Cut-Off Switch
Description: Moroso's Super-Duty switch with rating of 2000 amps intermittent and 300 amps continuous is perfect for engines with large starter draw, RVs, Drag Cars with alternators and other applications (20...More Details »
Condition:
New
Price: $106.99
Moroso | Accessory Switch
Description: Waterproof and dustproof with neoprene cap for in-car or under hood mounting
35 amp rated @ 12 volts...More Details »
Condition:
New
Price: $23.99
Moroso | Accessory Switch
Description: On-Off Single Throw Switches control accessories such as lights, pump, fan, etc.
Rated at 20 amps lamp load
ON/OFF faceplate included...More Details »
Condition:
New
Price: $22.99
Moroso | Accessory Switch
Description: On-Off Single Throw Switches control accessories such as lights, pump, fan, etc.
Rated at 20 amps lamp load
ON/OFF faceplate included...More Details »
Condition:
New
Price: $19.99
Moroso | Accessory Switch
Description: Heavy-duty switch has 15 amp rating; ideal for operating a tranbrake on drag race cars
Adjustable collar allows the plunger travel to be preset from .020" to .219", making the switch "fast" or...More Details »
Condition:
New
Price: $50.99
Moroso | Transmission Tail Shaft Plug
Description: Another time saver from Moroso
Eliminates the messy spilling of transmission fluid during transmission removal, replacement and storage
One per package...More Details »
Condition:
New
Price: $18.99
Moroso | Engine Coolant Reservoir Bracket
Description: Fits all 3" to 3.25" diameter tanks, including Moroso Overflow Tank No. 63657
Manufactured from a one-piece, zinc plated steel bracket with 11/32" mounting holes and a sliding, stainless steel...More Details »
Condition:
New
Price: $20.99
Moroso | Engine Coolant Reservoir
Description: Black polyethylene for light weight
2" Breather filter mounted on top
Four sizes of inlet fittings available
Can be modified for additional fitting for dual vent hoses
Works with Mounting...More Details »
Condition:
New
Price: $66.99
Moroso | Engine Coolant Reservoir
Description: Black polyethylene for light weight
2" Breather filter mounted on top
Four sizes of inlet fittings available
Can be modified for additional fitting for dual vent hoses
Works with Mounting...More Details »
Condition:
New
Price: $84.99
Moroso | Engine Coolant Reservoir
Description: Black polyethylene for light weight
2" Breather filter mounted on top
Four sizes of inlet fittings available
Can be modified for additional fitting for dual vent hoses
Works with Mounting...More Details »
Condition:
New
Price: $57.99
Moroso | Engine Coolant Reservoir
Description: Black polyethylene for light weight
2" Breather filter mounted on top
Four sizes of inlet fittings available
Can be modified for additional fitting for dual vent hoses
Works with Mounting...More Details »
Condition:
New
Price: $62.99
Moroso | Engine Coolant Reservoir
Description: 3/8" NPT inlets
Use as a remote breather/oil separator on dry sump tanks, rear axle housings, etc.
Designed to be panel-mounted and comes complete with Filtered Breather No. 68815 and drain cock...More Details »
Condition:
New
Price: $146.99
Moroso | Battery Terminal
Description: One turn of the knob disconnects the battery and saves the solid state voltage regulator and alternator when charging
Also deters possible car thieves when parked
Switch is rated at 100 amps for...More Details »
Condition:
New
Price: $31.99
Moroso | Battery Terminal
Description: One turn of the knob disconnects the battery and saves the solid state voltage regulator and alternator when charging
Also deters possible car thieves when parked
Switch is rated at 100 amps for...More Details »
Condition:
New
Price: $29.99
Moroso | Battery Terminal
Description: Brass compression-style fittings provide solid electrical connection
Two per pack...More Details »
Condition:
New
Price: $32.99
Moroso | Battery Terminal
Description: Brass compression-style fittings provide solid electrical connection
Two per pack...More Details »
Condition:
New
Price: $33.99
Moroso | Throttle Return Spring
Description: Pack of two stainless steel springs can be used as spares or replacements for Moroso Throttle Return Spring Kit Nos. 64925, 64926 and 64928...More Details »
Condition:
New
Price: $17.99
Moroso | Throttle Return Spring
Description: Provides positive throttle return required by several sanctioning bodies
Each kit fits Holley 2 or 4 bbl. single carb applications
Includes one set of return springs...More Details »
Condition:
New
Price: $43.99
Moroso | Throttle Return Spring
Description: Clears most air cleaner combinations and can be used with dual carbs
Made from sturdy 14-gauge steel and finished in hand-polished chrome
Kit includes heavy and light sets of stainless steel return...More Details »
Condition:
New
Price: $48.99
Moroso | Throttle Return Spring
Description: The answer to your throttle return spring linkageproblems if you're running a 2300/2305 series two-barrel or 4150/4160 series 4-barrel Holley or Road, Speed, Race Demon carburetor
Designed and...More Details »
Condition:
New
Price: $41.99
Moroso | Throttle Return Spring
Description: Provides positive throttle return required by several sanctioning bodies
Each kit fits Holley 2 or 4 bbl. single carb applications
Includes one set of return springs...More Details »
Condition:
New
Price: $34.99
Moroso | Tire Pressure Gauge
Description: Protective rubber cover insures long service and continued accuracy of Moroso 2-5/8" Tire Pressure Gauges
Specially designed ribs provide superior protection
A must for anyone who uses Moroso gauge...More Details »
Condition:
New
Price: $17.99
Moroso | Tire Pressure Gauge
Description: Features a bottom drain with elbow that makes draining the collected oil virtually mess-free...More Details »
Condition:
New
Price: $70.99
Moroso | Tire Pressure Gauge
Description: Strong back lighted display is easily read in the darkest of pits
2-5/8" dia. gauge face
Reads to .1 psi
Can be adjusted to read in standard and metric units
Auto-Off feature to increase...More Details »
Condition:
New
Price: $109.99
Moroso | Tire Pressure Gauge
Description: Smaller size fits in more applications and some customers prefer the smaller size body...More Details »
Condition:
New
Price: $71.99
Moroso | Automatic Transmission Oil Cooler
Description: Combination cooler/filters use "heat sink design" to dissipate the excessive heat build up in racing transmissions
Can be used on the street as an auxiliary cooler in conjunction with a stock...More Details »
Condition:
New
Price: $150.99
Moroso | Automatic Transmission Gasket Set
Description: Manufactured from 40 durometer rubber that is vulcanized to a rigid steel frame
The extra-strength design will not leak, blow out or get sucked in likestock or inferior quality aftermarket gaskets...More Details »
Condition:
New
Price: $47.99
Moroso | Automatic Transmission Mount
Description: Replace Stock, OEM-style rubber mounts to eliminate torque loss and binding linkages, a common result of excessive engine movement
Eliminates the need for bulky torque straps and chains...More Details »
Condition:
New
Price: $48.99