- Home »
- Catalog
Team C Performance » Pontiac, 4.1
Products for:
- Make: Pontiac
- Maximum Stroke: 4.1
View Universal items for: Pontiac 4.1
Browse Products
Moroso | Engine Oil Separator
Description: Air-Oil Separator Large Body, Ford Mustang Shelby GT 500, 2007-12
General Information
*Please note: May not apply to all kits
Plumbed into a vehicle's PCV system to capture the excess crankcase...More Details »
Condition:
New
Price: $211.99
Moroso | Brake Hydraulic Line Lock Kit
Description: Brake line locks are used in Drag Racing to lock the front wheels and hold the car in the water box for the burnout, or to prevent creeping in the light
Anti-roll design has better holding power...More Details »
Condition:
New
Price: $156.99
Moroso | Engine Oil Pan Baffle
Description: Mounts between rear main bearing cap and oil pump to prevent sump oil from reaching crankshaft during hard acceleration
Baffles must be trimmed to fit oil pan...More Details »
Condition:
New
Price: $19.99
Moroso | Engine Oil Pan Baffle
Description: Mounts between rear main bearing cap and oil pump to prevent sump oil from reaching crankshaft during hard acceleration
Baffles must be trimmed to fit oil pan...More Details »
Condition:
New
Price: $19.99
Moroso | Harmonic Balancer Puller
Description: Harmonic Balancer Installation and Removal Tool Kit, Chevy, Ford, Mopar, KB Hemi, Pontiac, Oldsmobile, and Buick
Innovative tool with multiple adapters to install and remove harmonic balaners...More Details »
Condition:
New
Price: $285.99
Moroso | Harmonic Balancer Puller
Description: Harmonic Balancer Installation Tool, BBC, or any engine with a 1/2" -20 threaded hole in the crank
Uses a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline...More Details »
Condition:
New
Price: $64.99
Moroso | Harmonic Balancer Puller
Description: Harmonic Balancer Installation Tool, SBC, or any engine with a 7/16" -20 threaded hole in the crank
Uses a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline...More Details »
Condition:
New
Price: $64.99
Moroso | Battery Cable Accessories
Description: High-grade 2 gauge copper cable provides unrestricted current flow
Rugged PVC insulation resists most car fuels, oils, and under hood cleaners
Ideal for relocating a battery to the rear for...More Details »
Condition:
New
Price: $134.99
Moroso | Accessory Drive Belt
Description:
California Residents: Prop 65 Warning...More Details »
Condition:
New
Price: $29.99
Moroso | Cooling System Bypass Line Adapter
Description: 1/4" aluminum plate provides an ideal base to weld-your-own radiator hose fitting to the intake manifold
Untreated aluminum makes it easy to drill opening and weld to any size fitting of your...More Details »
Condition:
New
Price: $18.99
Moroso | Hardware Assortment
Description: The thicker 3/4" hex head on this 7/16"-20 x 2-1/4" balancer bolt provides a larger contact surface for increased positive socket engagement
Especially important when crankshaft is being rotated...More Details »
Condition:
New
Price: $16.99
Moroso | Hardware Assortment
Description: Specially designed fasteners provide maximum holding strength and eliminate the possibility of shearing...More Details »
Condition:
New
Price: $14.99
Moroso | Hardware Assortment
Description: Bolts manufactured using Grade 8 steel and heat treated for maximum strength
Black oxide finish provides corrosion resistance...More Details »
Condition:
New
Price: $19.99
Moroso | Hardware Assortment
Description: 3/8" diameter, 12-point headed intake manifold bolts simplify the job of installing and removing many of todays aftermarket intake manifolds designed with extremely tight fastener clearances
Kits...More Details »
Condition:
New
Price: $39.99
Moroso | Hardware Assortment
Description: 3/8" diameter, 12-point headed intake manifold bolts simplify the job of installing and removing many of todays aftermarket intake manifolds designed with extremely tight fastener clearances
Kits...More Details »
Condition:
New
Price: $37.99
Moroso | Hardware Assortment
Description: 3/8" diameter, 12-point headed intake manifold bolts simplify the job of installing and removing many of todays aftermarket intake manifolds designed with extremely tight fastener clearances
Kits...More Details »
Condition:
New
Price: $27.99
Moroso | Engine Oil Pan Bolt
Description: Self-Locking Oil Pan Bolts manufactured from Grade 8 steel
Integral serrated washer face provides self-locking effect
Zinc plated...More Details »
Condition:
New
Price: $19.99
Moroso | Engine Oil Pan Bolt
Description: Self-Locking Oil Pan Bolts manufactured from Grade 8 steel
Integral serrated washer face provides self-locking effect
Zinc plated...More Details »
Condition:
New
Price: $16.99
Moroso | Hardware Assortment
Description: Specially designed fasteners provide maximum holding strength and eliminate the possibility of shearing...More Details »
Condition:
New
Price: $14.99
Moroso | Hardware Assortment
Description: 1/4" -20 hex head timing cover bolts manufactured of cadmium-plated Grade 8 steel
Integral serrated washer face insures positive locking against the timing cover
Ten per package...More Details »
Condition:
New
Price: $11.99
Moroso | Spark Plug Boot Kit
Description: Manufactured from high temperature silicone
Comes in sets of 8 with positive, locking spark plug terminals...More Details »
Condition:
New
Price: $27.99
Moroso | Spark Plug Boot Kit
Description: Manufactured from high temperature silicone
Comes in sets of 8 with positive, locking spark plug terminals...More Details »
Condition:
New
Price: $38.99
Moroso | Engine Crankcase Breather Cap
Description: Kit contains two aluminum 1-3/8" O.D. breather tubes with internal baffling, two half-hooded filtered breathers, and two stainless hose clamps
Designed to be welded to Moroso valve covers and can...More Details »
Condition:
New
Price: $71.99
Moroso | Crankcase Breather Bottle
Description: 3/8" NPT inlet
Use as a remote breather/oil separator on dry sump tanks, rear axle housings, etc.
Designed to be panel-mounted and comes complete with Filtered Breather No. 68815 and drain cock...More Details »
Condition:
New
Price: $127.99
Moroso | Crankcase Breather Bottle
Description: Remote breather tank is a perfect companion for Moroso's Racing Vacuum Pumps or Dry Sump Tanks has -12AN fitting to simplify plumbing
All aluminum, lightweight tank features mounting straps to...More Details »
Condition:
New
Price: $135.99
Moroso | Crankcase Breather Bottle
Description: Eliminates the need for two tanks
Larger capacity 2.5 quart tank complete with dual -12AN fittings, allows hookup from Vacuum Pump and Dry Sump Pump
All-aluminum, lightweight 3" x 17-1/2"...More Details »
Condition:
New
Price: $151.99
Moroso | Crankcase Breather Bottle
Description: All billet aluminum, lightweight tank features mounting strap to simplify installation
Includes non-hooded, clamp-on-style Filtered Breather that traps oil while allowing air to escape freely...More Details »
Condition:
New
Price: $179.99
Moroso | Engine Crankcase Breather Cap
Description: Made of 14 gauge 6061-T6 aluminum, this baffle mounts inside Moroso valve covers under the breather hole to keep oil from getting into the breather
Use with Valve Cover Breathers Nos. 68720, 68721,...More Details »
Condition:
New
Price: $13.99
Moroso | Engine Crankcase Breather Cap
Description: Available in half-hooded or non-hooded
Provides maximum protection against dirt and airborne debris without restricting air flow
Also available with completely exposed filter element and chrome...More Details »
Condition:
New
Price: $22.99
Moroso | Engine Crankcase Breather Cap
Description: Available in half-hooded or non-hooded
Provides maximum protection against dirt and airborne debris without restricting air flow
Also available with completely exposed filter element and chrome...More Details »
Condition:
New
Price: $28.99
Moroso | Engine Crankcase Breather Cap
Description: Available in half-hooded or non-hooded
Provides maximum protection against dirt and airborne debris without restricting air flow
Also available with completely exposed filter element and chrome...More Details »
Condition:
New
Price: $30.99
Moroso | Engine Crankcase Breather Cap
Description: Available in half-hooded or non-hooded
Provides maximum protection against dirt and airborne debris without restricting air flow
Also available with completely exposed filter element and chrome...More Details »
Condition:
New
Price: $24.99
Moroso | Engine Oil Separator
Description: Fits: Moroso or any valve cover with 1.22" hole; includes rubber gromnet
Is ideal for plumbing your crankcase ventilation system into the air cleaner or as a direct breather replacement for No....More Details »
Condition:
New
Price: $19.99
Moroso | Engine Oil Separator
Description: Fits: Moroso or any valve cover with 1.22" hole; includes rubber gromnet
Is ideal for plumbing your crankcase ventilation system into the air cleaner or as a direct breather replacement for No....More Details »
Condition:
New
Price: $18.99
Moroso | Engine Crankcase Breather Pipe Plug
Description: Can be welded to aluminum valve covers, holding tanks, cylinder heads, oil pans, etc. or wherever an NPT fitting is needed
Made of 6061-T6 aluminum and fit a 1" diameter hole
Two per pack...More Details »
Condition:
New
Price: $24.99
Moroso | Engine Crankcase Breather Pipe Plug
Description: Can be welded to aluminum valve covers, holding tanks, cylinder heads, oil pans, etc. or wherever an NPT fitting is needed
Made of 6061-T6 aluminum and fit a 1" diameter hole
Two per pack...More Details »
Condition:
New
Price: $20.99
Moroso | Carburetor Accelerator Linkage Bushing
Description: Steel linkage bushing set allows the fitting of a 1/4" fastener to the 1/2" dia. hole found in the throttle linkage plate of Holley 4 barrel carbs
Split bushing design permits simple installation...More Details »
Condition:
New
Price: $13.99
Moroso | Engine Camshaft Thrust Button
Description: Professional engine builders are familiar with camshaft "walk" when excessive end play produces erratic spark timing and the timing chain/gear "eats" the timing cover
Moroso solves the problem...More Details »
Condition:
New
Price: $24.99
Moroso | Engine Camshaft Thrust Button
Description: Professional engine builders are familiar with camshaft "walk" when excessive end play produces erratic spark timing and the timing chain/gear "eats" the timing cover
Moroso solves the problem...More Details »
Condition:
New
Price: $24.99
Moroso | Engine Camshaft Thrust Button
Description: Professional engine builders are familiar with camshaft "walk" when excessive end play produces erratic spark timing and the timing chain/gear "eats" the timing cover
Moroso solves the problem...More Details »
Condition:
New
Price: $24.99
Moroso | Engine Timing Camshaft Gear Bolt
Description: Dont let a broken camshaft bolt ruin your motor!
Hex head 5/16"-18 camshaft bolts are manufactured from tough Grade 8 steel with a black oxide finish
Three per pack; includes retaining plate...More Details »
Condition:
New
Price: $9.99
Moroso | Carburetor Adapter Plate
Description:
California Residents: Prop 65 Warning...More Details »
Condition:
New
Price: $106.99
Moroso | Carburetor Air Pan Sealing Foam
Description: Available for either single or dual carb applications
Unlike other brands, our Air Pan Kits are designed with a smooth radius at the intake area of the carburetor for improved airflow
Air...More Details »
Condition:
New
Price: $98.99
Moroso | Carburetor Choke Thermostat Cap
Description: Keeps dust and other foreign material out of carburetors during transportation and storage
Manufactured from durable, high-impact plastic
Thumbscrew included...More Details »
Condition:
New
Price: $14.99
Moroso | Carburetor Choke Thermostat Cap
Description: Keeps dust and other foreign material out of carburetors during transportation and storage
Manufactured from durable, high-impact plastic
Thumbscrew included...More Details »
Condition:
New
Price: $21.99
Moroso | Carburetor Accelerator Pump Cup / Stem
Description: Now you don't have to spill fuel all over the engine when removing fuel-bowl screws to service Holley carburetors
Gary Williams-designed Carburetor Drain Cup uses a channel handle to catch...More Details »
Condition:
New
Price: $16.99
Moroso | Carburetor Spacer
Description: Cast Aluminum
Can easily be mounted with one of the Moroso Carburetor Stud Kits Nos. 37950, 37960 or 37961
Open plenum aluminum carb spacers increase plenum volume for high RPM power
*Not legal...More Details »
Condition:
New
Price: $58.99
Moroso | Carburetor Spacer
Description: Advanced plastic compound, specially formulated to reduce heat conductivity 10 times greater than aluminum
Reducing fuel temperature inside the carburetor results in a denser, more powerful fuel...More Details »
Condition:
New
Price: $55.99
Moroso | Carburetor Spacer
Description: Advanced phenolic compound, specially formulated to reduce heat conductivity 10 times greater than aluminum
Reducing fuel temperature inside the carburetor results in a denser, more powerful fuel...More Details »
Condition:
New
Price: $51.99
Moroso | Carburetor Spacer
Description: Advanced phenolic compound, specially formulated to reduce heat conductivity 10 times greater than aluminum
Reducing fuel temperature inside the carburetor results in a denser, more powerful fuel...More Details »
Condition:
New
Price: $42.99
Moroso | Carburetor Spacer
Description: Unique 1/2" spacers are precision machined on state-of-the-art millworking centers, and can be used individualy or stacked without the use of gaskets
Thin layers of choice laminated hardwood,...More Details »
Condition:
New
Price: $48.99
Moroso | Carburetor Spacer
Description: Cast Aluminum
Can easily be mounted with one of the Moroso Carburetor Stud Kits Nos. 37950, 37960 or 37961
Open plenum aluminum carb spacers increase plenum volume for high RPM power
*Not legal...More Details »
Condition:
New
Price: $93.99
Moroso | Engine Air Intake Vacuum Check Valve
Description:
California Residents: Prop 65 Warning...More Details »
Condition:
New
Price: $29.99
Moroso | Engine Air Intake Vacuum Check Valve
Description: 1/2" NPT to 1/2" NPT One Way
For use with oil accumulators and oil coolers
For prevention of oil drain-back...More Details »
Condition:
New
Price: $38.99
Moroso | Engine Oil Separator
Description: All the parts necessary to make a coil wire to fit virtually all popular coils and distributor cap combinations
Kit contains three feet of Blue Max Spiral Core 8mm suppression wire, a wire...More Details »
Condition:
New
Price: $27.99
Moroso | Battery Cable Grommet
Description: Can be used wherever a battery cable goes through a firewall
Connector fits through 1-1/4" hole
Use Battery Cable Remote Fitting End Kit Nos 74170 or 74172 to complete installation
One per pack...More Details »
Condition:
New
Price: $27.99
Moroso | Battery Cable Grommet
Description: Can be used wherever a battery cable goes through a firewall
Connector fits through 1-1/4" hole
Use Battery Cable Remote Fitting End Kit Nos 74170 or 74172 to complete installation
One per pack...More Details »
Condition:
New
Price: $24.99
Moroso | Engine Crankshaft Bolt Tool
Description: Designed to simplify the task of crankshaft rotation during short block assembly with the balancer removed
Manufactured of tool quality steel with gold iridite finish
Accepts 1/2" drive...More Details »
Condition:
New
Price: $49.99
Moroso | Engine Crankshaft Bolt Tool
Description: Don't use the crank hub retaining bolt to rotate your engine!
By removing the crank hub or balancer and using a Moroso Crankshaft Socket Tool, engine builders have a positive way to turn over the...More Details »
Condition:
New
Price: $94.99
Moroso | Engine Crankshaft Bolt Tool
Description: Designed to simplify the task of crankshaft rotation during short block assembly with the balancer removed
Manufactured of tool quality steel with gold iridite finish
Accepts 1/2" drive...More Details »
Condition:
New
Price: $49.99